e30
Moderate
AEG · Tumble Dryers
Pressure sensor or water level problem
Quick Answer
Error code E30 on your AEG Tumble Dryers means: Pressure sensor or water level problem. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check the pressure sensor hose for blockages
2
Inspect wiring connections to the pressure sensor
3
Test the pressure sensor
4
Replace the pressure sensor if faulty
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Pressure sensor
Related Error Codes