f928
Moderate
AEG · Ovens
No signal between touch panel and control module
Quick Answer
Error code F928 on your AEG Ovens means: No signal between touch panel and control module. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check the cable between the touch panel and control module
2
Reseat the connectors
3
Test the touch panel
4
Replace the touch panel or control module
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Touch panel
Control module
Connection cable
Related Error Codes