e10
Easy Fix
AEG · Washing Machines
Water supply issue - not enough water entering the drum
Quick Answer
Error code E10 on your AEG Washing Machines means: Water supply issue - not enough water entering the drum. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check that the water tap is fully open
2
Inspect the inlet hose for kinks or blockages
3
Clean the inlet hose filter screen
4
Test the inlet valve with a multimeter (should read 2000-4000 Ohms)
5
Replace the inlet valve if defective
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Inlet valve
Inlet hose filter
Related Error Codes