power_loss_resume
Moderate
Anycubic · FDM 3D Printers
Power Loss Detected - Resume Print Available
Quick Answer
Error code POWER_LOSS_RESUME on your Anycubic FDM 3D Printers means: Power Loss Detected - Resume Print Available. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
When power returns, the printer will display a resume print prompt on the LCD
2
Before resuming, check that the print is still adhered to the bed and the nozzle is not embedded in the print
3
Select resume on the LCD to continue from the last saved Z position
4
If the print has shifted or detached, cancel and restart the print
5
Verify the power cord is firmly connected and consider using a UPS
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
UPS (uninterruptible power supply)
Replacement IEC power cord
Related Error Codes