p0341
Moderate
Audi · SUVs
Camshaft Position Sensor A Circuit Range/Performance (Bank 1)
Quick Answer
Error code P0341 on your Audi SUVs means: Camshaft Position Sensor A Circuit Range/Performance (Bank 1). This is usually fixable — see the step-by-step guide below.
Affected Models
Likely Causes
How to Fix It
1
Inspect the camshaft position sensor connector for corrosion or bent pins
2
Test the sensor output with an oscilloscope to verify signal integrity
3
Trace the wiring harness from sensor to ECU for breaks, chafing, or shorts
4
Check the camshaft tone wheel for missing teeth or physical damage
5
Replace the camshaft position sensor if testing confirms it is out of specification
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Camshaft position sensor
Wiring harness repair kit
Sensor connector
Timing chain kit (if chain stretch is found)
Related Error Codes