e25
Moderate
Bosch · Dishwashers
Drain pump blocked or cover loose
Quick Answer
Error code E25 on your Bosch Dishwashers means: Drain pump blocked or cover loose. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Turn off the dishwasher and unplug it.
2
Remove the bottom rack and the filter assembly completely.
3
Locate the drain pump cover at the bottom of the dishwasher.
4
Pry off the pump cover with a spoon until it clicks, then grip and pull upward until resistance is felt, then pull forward to remove.
5
Check the drain pump impeller and remove any debris (use caution - debris may be sharp).
6
Remove standing water with a sponge.
7
Reinstall the pump cover securely and the filter assembly.
8
Run a test cycle to verify proper drainage.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Drain pump (if motor has failed)
Related Error Codes