f01
Moderate
Bosch · Ovens & Ranges
Oven overheating in clean mode / temperature regulation failure
Quick Answer
Error code F01 on your Bosch Ovens & Ranges means: Oven overheating in clean mode / temperature regulation failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Allow the oven to cool down completely before taking any action.
2
Turn off the oven at the circuit breaker.
3
Once cool, check if the heating element continues to glow when the oven should be off.
4
If an element is heating constantly, a relay on the electronic control board is likely stuck.
5
Replace the electronic control board if a relay is stuck.
6
Test heating elements with a multimeter for short circuits.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electronic control board
Heating element (if shorted)
Multimeter
Related Error Codes