f11
Moderate
Bosch · Washing Machines
Motor overheating / heat sink PCB fault detected repeatedly
Quick Answer
Error code F11 on your Bosch Washing Machines means: Motor overheating / heat sink PCB fault detected repeatedly. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Allow the washer to cool down for at least 30 minutes.
2
Check the motor ventilation for blockages.
3
Inspect the motor control PCB heat sink for damage.
4
This error requires professional service; contact a qualified technician.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Motor control PCB
Related Error Codes