HomeBrandsBYDElectric & Hybrid Carsbyd_das01
B
byd_das01
Moderate
BYD · Electric & Hybrid Cars
DiPilot Camera Calibration Required
Quick Answer
Error code BYD_DAS01 on your BYD Electric & Hybrid Cars means: DiPilot Camera Calibration Required. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
BYD-A3BYD-DPBYD-HNBYD-SLBYD-SUBYD-SPBYD-TG
Likely Causes
  1. Camera mounting position shifted from impact or vibration requiring recalibration to vehicle geometry
  2. Windshield replacement without subsequent camera recalibration procedure
  3. Software update altering camera processing parameters requiring calibration to match new baseline
  4. Sustained vibration from poor road surfaces causing calibration data drift over time
  5. Camera housing replacement or servicing without performing mandatory post-service calibration
How to Fix It
1
Avoid relying on DiPilot driver assistance features until calibration is completed
2
Check if the calibration can be initiated via the DiPilot settings menu for a limited self-calibration routine
3
Drive at the recommended speed on a straight road with clear lane markings to assist automatic calibration
4
Verify that no recent windshield work or camera servicing was performed without recalibration
5
Schedule BYD service for a full DiPilot camera static calibration using the alignment target tool
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
DiPilot camera calibration target board
Certified ADAS calibration diagnostic tool
Camera mounting bracket if physically displaced
Related Error Codes
BYD_BMS01BYD_BMS02BYD_BMS03BYD_CHG01BYD_CHG02
Video Guides
Loading video guides…
Search more on YouTube →