temp_too_low
Easy Fix
Elegoo · Resin (SLA/MSLA) 3D Printers
Ambient or Resin Temperature Below Minimum Operating Threshold
Quick Answer
Error code TEMP_TOO_LOW on your Elegoo Resin (SLA/MSLA) 3D Printers means: Ambient or Resin Temperature Below Minimum Operating Threshold. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Move the printer to a warmer environment (recommended operating temperature is 20-30C)
2
Allow resin to acclimate to room temperature for at least 2 hours before printing
3
If the printer has a built-in heater, verify it is enabled in the settings
4
Use a space heater to warm the printing area (not directed at the printer)
5
Consider an aftermarket printer enclosure with a heater for cold environments
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Printer enclosure with heater (aftermarket)
Resin heater pad (aftermarket accessory)
Room thermometer for ambient temperature monitoring
Related Error Codes