e05
Moderate
FlashForge · FDM 3D Printers
X-Axis Movement Error - Motor Stall or Position Loss
Quick Answer
Error code E05 on your FlashForge FDM 3D Printers means: X-Axis Movement Error - Motor Stall or Position Loss. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Open the build chamber and manually slide the print head along the X-axis to feel for binding
2
Check the X-axis belt for proper tension and ensure it is seated on the pulleys
3
Remove any print debris, tools, or foreign objects from inside the build chamber
4
Inspect the X motor cable connector for secure seating at both ends
5
Clean and re-lubricate the X-axis linear guides with the manufacturer-recommended lubricant
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Replacement X-axis belt (GT2 6mm)
Linear guide lubricant
Replacement X stepper motor (if motor has failed)
Related Error Codes