2100
Moderate
Generac · Standby Generators
Controller communication fault with one or more subsystems.
Quick Answer
Error code 2100 on your Generac Standby Generators means: Controller communication fault with one or more subsystems.. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Power cycle control panel safely.
2
Inspect harness connectors for corrosion/loose fit.
3
Update firmware if supported.
4
Check battery and charger stability.
5
If unresolved, replace faulty module under service guidance.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Related Error Codes