p0341
Moderate
Honda · Sedans
Camshaft Position Sensor Range/Performance
Quick Answer
Error code P0341 on your Honda Sedans means: Camshaft Position Sensor Range/Performance. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
CV3CV4FC1FC4FE1FL5ZC5Accord EX 2024Accord EX-L 2024Accord Hybrid EX-L 2024Accord Hybrid Sport 2024Accord Hybrid Touring 2024Accord LX 2024Accord Sport 2024Accord Touring 2024Civic EX 2024Civic Hybrid Sport 2025Civic Hybrid Sport Touring 2025Civic LX 2024Civic Si 2024Civic Sport 2024Civic Touring 2024Civic Type R 2024ZE4
Likely Causes
How to Fix It
1
Inspect the camshaft position sensor connector for corrosion, bent pins, or damage
2
Test the camshaft position sensor output signal using an oscilloscope or scan tool live data
3
Check the timing chain or belt for proper tension and alignment marks
4
Remove the sensor and inspect the tip for oil contamination or metallic debris
5
Replace the camshaft position sensor if the signal is erratic or out of specification
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Camshaft position sensor
Sensor O-ring or gasket
Timing chain tensioner (if applicable)
Timing chain or belt (if worn)
Related Error Codes