p0113
Easy Fix
Honda · SUVs
Intake Air Temperature Sensor Circuit High Input
Quick Answer
Error code P0113 on your Honda SUVs means: Intake Air Temperature Sensor Circuit High Input. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
RW1RW3RW5RV1CR-V EX 2024CR-V EX-L 2024CR-V Hybrid Sport 2024CR-V Hybrid Sport Touring 2024CR-V Hybrid Sport-L 2024CR-V LX 2024CR-V Sport 2024CR-V Sport Touring 2024HR-V EX-L 2024HR-V LX 2024HR-V Sport 2024Passport EX-L 2024Passport Sport 2024Passport Touring 2024Passport TrailSport 2024Pilot EX 2024Pilot EX-L 2024Pilot Elite 2024Pilot LX 2024Pilot Touring 2024Pilot TrailSport 2024YG7YA7ZD1RZ1
Likely Causes
How to Fix It
1
Locate the IAT sensor (often integrated into the MAF sensor on Honda SUVs or in the intake duct)
2
Inspect the IAT sensor connector for corrosion, bent pins, or disconnection
3
Measure IAT sensor resistance at ambient temperature; it should read approximately 2-3 kOhm at 68 degrees F
4
Check continuity of the IAT sensor wiring between the sensor and the ECM connector
5
Replace the IAT sensor or MAF sensor assembly if resistance values are out of specification
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
IAT sensor (or MAF sensor assembly if integrated)
Sensor connector pigtail
Wiring repair kit
Related Error Codes