f6e1
Easy Fix
KitchenAid · Dishwashers
Water Inlet Valve Fault
Quick Answer
Error code F6E1 on your KitchenAid Dishwashers means: Water Inlet Valve Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Verify the water supply shutoff valve under the sink is fully open
2
Disconnect the supply line from the inlet valve and clean the filter screen at the valve port
3
Test the inlet valve solenoid coil with a multimeter for continuity (expected 500-1500 ohms)
4
Check that the control board is sending 120V to the valve during the fill portion of the cycle (use a non-contact voltage tester for safety)
5
Replace the water inlet valve if the solenoid is open; investigate the control board if the valve is not receiving power
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
KitchenAid water inlet valve (part #W10195049)
Inlet hose screen filter
Supply line (if damaged)
Related Error Codes