HomeBrandsKitchenAidDishwashersf7e1
K
f7e1
Moderate
KitchenAid · Dishwashers
Wash Motor Not Running
Quick Answer
Error code F7E1 on your KitchenAid Dishwashers means: Wash Motor Not Running. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
KDFE104HPSKDPM804KPSKDTE204KPSKDTE254EBSKDTE334GPSKDTM404KPS
Likely Causes
  1. Wash motor (circulation pump motor) has seized or burned out
  2. Motor capacitor has failed, preventing the motor from starting (on capacitor-start models)
  3. Motor impeller is jammed by a foreign object such as broken glass or a utensil fragment
  4. Wiring to the wash motor has an open circuit or damaged connector
How to Fix It
1
Listen for a humming sound when a cycle starts; humming without water spray indicates a jammed or seized motor
2
Remove the lower rack, spray arm, and filter assembly to check for debris in the wash pump intake
3
Clear any foreign objects from the pump area and impeller
4
If the motor does not hum at all, disconnect power and test the motor windings for continuity
5
Replace the wash motor/circulation pump if the motor is seized or windings are open
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
KitchenAid wash motor/circulation pump (part #W10902589)
Motor capacitor (if applicable)
Pump seal gasket
Related Error Codes
F1E1F1E2F2E1F2E2F3E1
Video Guides
Loading video guides…
Search more on YouTube →