e2
Moderate
Samsung · Dishwashers
Water output/drain error - dishwasher not emptying properly
Quick Answer
Error code E2 on your Samsung Dishwashers means: Water output/drain error - dishwasher not emptying properly. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Locate and remove the drain filter at the bottom front of the dishwasher.
2
Clean the filter thoroughly under running water.
3
Inspect the drain hose for blockages or kinks.
4
Check the drain pump for debris and clear if necessary.
5
Ensure the garbage disposal knockout plug has been removed.
6
If the drain pump is faulty, it will need replacement.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Drain pump
Drain filter
Drain hose
Related Error Codes