fe
Call a Pro
Samsung · Dishwashers
Water fill error - too much water entering dishwasher
Quick Answer
Error code FE on your Samsung Dishwashers means: Water fill error - too much water entering dishwasher. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Unplug the dishwasher immediately to stop water flow.
2
If water continues to fill the tub after unplugging, the water inlet valve is stuck open and must be replaced.
3
If water stops filling after unplugging, the main control board may be sending incorrect signals and may need replacement.
4
Check the float switch at the bottom of the tub for proper operation.
5
Contact a technician for diagnosis and replacement.
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Water inlet valve
Main control board (PBA)
Float switch
Related Error Codes