oe
Call a Pro
Samsung · Dishwashers
Overflow error - water level too high
Quick Answer
Error code oE on your Samsung Dishwashers means: Overflow error - water level too high. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Unplug the dishwasher to disconnect electrical power immediately.
2
If water continues to fill the tub after unplugging, the water inlet valve is stuck and must be replaced.
3
If filling stops when you disconnect power, the main power board assembly needs replacement.
4
Clear any drain blockages to allow water to exit.
5
Contact a technician if the issue persists.
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Water inlet valve
Main power board assembly (PBA)
Related Error Codes