pe
Call a Pro
Samsung · Dishwashers
Half-load function error
Quick Answer
Error code PE on your Samsung Dishwashers means: Half-load function error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Unplug the dishwasher from power.
2
Empty the dishwasher, add detergent, and run a Half Load cycle.
3
If the error persists, unplug the dishwasher and reconnect any loose wires on the distributor plate motor and microswitch.
4
Replace the wire harness if it is damaged.
5
If the wires are intact, replace the distributor motor assembly (includes the distributor plate motor and microswitch).
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Distributor motor assembly
Wire harness
Microswitch
Related Error Codes