ts
Moderate
Samsung · Dryers
Temperature sensor error (shorted or open)
Quick Answer
Error code tS on your Samsung Dryers means: Temperature sensor error (shorted or open). This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Unplug the dryer.
2
Step 2: Clean the lint trap thoroughly. Remove all lint and debris.
3
Step 3: Inspect and clean the entire vent system from the dryer to the outside vent hood.
4
Step 4: If the vent is clear, test the thermistor with a multimeter. It should read approximately 10,000 ohms at room temperature.
5
Step 5: If the thermistor reading is abnormal, replace the thermistor.
6
Step 6: Check the wiring between the thermistor and the main control board for damage.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Thermistor
Lint screen
Vent cleaning kit
Related Error Codes