HomeBrandsSEATSedans & Hatchbacksp0341
p0341
Moderate
SEAT · Sedans & Hatchbacks
Camshaft Position Sensor Range/Performance (Bank 1)
Quick Answer
Error code P0341 on your SEAT Sedans & Hatchbacks means: Camshaft Position Sensor Range/Performance (Bank 1). This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
AUAMK16FKL
Likely Causes
  1. Faulty camshaft position sensor electrical signal
  2. Timing chain or belt slippage
  3. Camshaft or crankshaft reluctor ring debris or damage
  4. Wiring issues or corroded connector on camshaft position sensor
  5. Engine control module unable to sync camshaft and crankshaft timing
How to Fix It
1
Inspect the camshaft position sensor connector for corrosion and proper seating
2
Test camshaft position sensor signal using an oscilloscope or scan tool
3
Check the reluctor ring for damage, missing teeth, or debris
4
Verify timing belt or chain condition and tension
5
Replace camshaft position sensor if signal is erratic or absent
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Camshaft position sensor
Sensor connector and pins
Timing chain or belt
Engine coolant (if timing components accessed)
Related Error Codes
P0171P0300P0420P0411P0441
Video Guides
Loading video guides…
Search more on YouTube →