f1 e1
Call a Pro
Whirlpool · Dishwashers
Stuck relay on control board
Quick Answer
Error code F1 E1 on your Whirlpool Dishwashers means: Stuck relay on control board. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Turn off power to the dishwasher at the circuit breaker for at least 1 minute.
2
Step 2: Restore power and check if the error returns.
3
Step 3: If code persists, access the tech sheet behind the bottom front toe panel.
4
Step 4: Use a multimeter to check point-to-point continuity in the harness.
5
Step 5: If the harness checks good, replace the main control board.
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Main control board
Related Error Codes