cc
Moderate
Whirlpool · Refrigerators
Compressor Circuit Failure
Quick Answer
Error code CC on your Whirlpool Refrigerators means: Compressor Circuit Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Unplug the refrigerator and access the compressor, located at the rear bottom behind the access panel
2
Remove the start relay and overload protector from the compressor and test both with a multimeter for continuity
3
Shake the start relay gently; a rattling sound indicates a broken internal component requiring replacement
4
Test the compressor windings between the three terminal pins for proper resistance; typical readings are 3-7 ohms between start and common, 2-4 ohms between run and common
5
Replace the start relay and overload first as they are the most common failure point; if the compressor windings are out of specification, compressor replacement or professional service is required
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Compressor start relay and overload kit (W10613606)
Compressor (professional installation required)
Run capacitor
Related Error Codes