f2 e1
Moderate
Whirlpool · Washing Machines
User interface control mismatch or stuck button
Quick Answer
Error code F2 E1 on your Whirlpool Washing Machines means: User interface control mismatch or stuck button. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Check if any buttons on the control panel appear stuck or jammed.
2
Step 2: Try pressing each button to free any stuck buttons.
3
Step 3: Verify the user interface control is the correct part number for your model.
4
Step 4: If the wrong part was installed, order the correct user interface control.
5
Step 5: Replace the user interface control if it is defective.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
User interface control assembly
Related Error Codes