f3 e1
Moderate
Whirlpool · Washing Machines
Water level pressure sensor fault
Quick Answer
Error code F3 E1 on your Whirlpool Washing Machines means: Water level pressure sensor fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Unplug the washer.
2
Step 2: Locate the pressure hose running from the tub to the pressure switch.
3
Step 3: Check for kinks, pinches, clogs, or air leaks in the hose.
4
Step 4: Clear any blockages and reconnect any disconnected hoses.
5
Step 5: If the hose is clear, test the pressure switch with a multimeter.
6
Step 6: Replace the pressure switch if it tests faulty.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water level pressure switch
Pressure hose
Related Error Codes