f3 e2
Moderate
Whirlpool · Washing Machines
Temperature sensor (NTC) fault
Quick Answer
Error code F3 E2 on your Whirlpool Washing Machines means: Temperature sensor (NTC) fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Unplug the washer.
2
Step 2: Locate the wash temperature sensor (NTC thermistor).
3
Step 3: Check the sensor wiring for damage or loose connections.
4
Step 4: Test the sensor resistance with a multimeter (should read approximately 50,000 ohms at room temperature).
5
Step 5: Replace the sensor if resistance is out of range.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Temperature sensor (NTC thermistor)
Related Error Codes