f8 e1
Easy Fix
Whirlpool · Washing Machines
Long fill fault - washer filling too slowly
Quick Answer
Error code F8 E1 on your Whirlpool Washing Machines means: Long fill fault - washer filling too slowly. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Verify that both hot and cold water supply valves are fully open.
2
Step 2: Check the water inlet hoses for kinks or blockages.
3
Step 3: Remove and clean the inlet valve screens (small mesh screens inside hose connections).
4
Step 4: Verify adequate water pressure at the supply (minimum 20 psi recommended).
5
Step 5: If water pressure and hoses are fine, test the water inlet valve and replace if defective.
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Water inlet valve
Inlet hose screens
Related Error Codes