f9 e1
Moderate
Whirlpool · Washing Machines
Long drain time - drain failure
Quick Answer
Error code F9 E1 on your Whirlpool Washing Machines means: Long drain time - drain failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Check the drain hose for kinks or blockages.
2
Step 2: Ensure the drain hose is not sealed into the drain pipe (needs an air gap).
3
Step 3: Clean the drain pump filter (located behind the lower front panel).
4
Step 4: Verify the drain hose height is below 8 feet.
5
Step 5: If using too much detergent, reduce the amount and run an extra rinse.
6
Step 6: If the drain pump is not running, test it with a multimeter and replace if defective.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Drain pump
Drain hose
Related Error Codes