i10
Easy Fix
AEG · Dishwashers
Water inlet problem - not filling with water
Quick Answer
Error code i10 on your AEG Dishwashers means: Water inlet problem - not filling with water. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check the water supply tap is fully open
2
Place a bucket underneath the tap and check you get 10 litres within a minute
3
Inspect the inlet hose for kinks or blockages
4
Clean the filter screen on the inlet valve
5
Replace the inlet valve if it fails testing
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Inlet valve
Inlet hose
Related Error Codes