i30
Moderate
AEG · Dishwashers
Leak protection activated - water detected in base
Quick Answer
Error code i30 on your AEG Dishwashers means: Leak protection activated - water detected in base. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Turn off the water supply immediately
2
Check that the dishwasher is correctly installed and level
3
Inspect door seal for damage
4
Tilt the machine to drain water from the base
5
Check all internal hose connections for leaks
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Door seal
Hose clamps
Float switch
Related Error Codes