e70
Moderate
AEG · Tumble Dryers
Communication or NTC sensor error
Quick Answer
Error code E70 on your AEG Tumble Dryers means: Communication or NTC sensor error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Check the NTC temperature sensor connections
2
Test the NTC sensor resistance with a multimeter
3
Inspect wiring between the sensor and control board
4
Replace the NTC sensor if faulty
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
NTC temperature sensor
Related Error Codes