HomeBrandsElectroluxDryerse54
E
e54
Moderate
Electrolux · Dryers
Motor Relay Failure
Quick Answer
Error code E54 on your Electrolux Dryers means: Motor Relay Failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
EFME627UTTEFMG627UTTELFE7637ATELFG7637ATELTE7637AT
Likely Causes
  1. Motor relay on the main control board has failed from repeated thermal cycling
  2. Drive motor is drawing excess current, overloading the relay
  3. Cold solder joint on the motor relay causing intermittent contact
  4. Power surge damaged the relay circuit
How to Fix It
1
Disconnect power and remove the top panel to access the main control board
2
Inspect the control board for visible burn marks or discoloration near the motor relay
3
Test the drive motor independently to confirm it is not drawing excess current
4
If the motor tests normal and the board shows relay damage, replace the main control board
5
Run a test cycle after replacement to verify normal motor operation
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electrolux main control board (part #137070860)
Drive motor (if it is causing relay overload)
Related Error Codes
E11E21E31E41E52
Video Guides
Loading video guides…
Search more on YouTube →