HomeBrandsElectroluxDryerse61
E
e61
Moderate
Electrolux · Dryers
Heater Not Reaching Temperature
Quick Answer
Error code E61 on your Electrolux Dryers means: Heater Not Reaching Temperature. This is usually fixable — see the step-by-step guide below.
Likely Causes
  1. One or more heating element coils have burned out (open circuit)
  2. High-limit thermostat has tripped and needs to be reset or replaced
  3. Thermal fuse has blown due to restricted airflow from a clogged vent
  4. Heater relay on the control board is not energizing the heater circuit
How to Fix It
1
Check the dryer exhaust vent for lint blockage; disconnect the vent and run a timed dry cycle to test
2
Disconnect power and access the heater assembly (typically behind the rear panel or under the drum)
3
Test the heating element with a multimeter for continuity (should read 8-20 ohms depending on wattage)
4
Test the high-limit thermostat and thermal fuse for continuity; replace any that are open
5
Replace the heating element assembly if it shows no continuity
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electrolux dryer heating element (part #137234600)
High-limit thermostat (part #137032600)
Thermal fuse (part #137032800)
Related Error Codes
E11E21E31E41E52
Video Guides
Loading video guides…
Search more on YouTube →