e64
Moderate
Electrolux · Dryers
Heater Circuit Open
Quick Answer
Error code E64 on your Electrolux Dryers means: Heater Circuit Open. This is usually fixable — see the step-by-step guide below.
Likely Causes
How to Fix It
1
Disconnect power and access the heating element assembly behind the rear panel
2
Visually inspect the element for a visible break or burn-through point in the coils
3
Test the element for continuity with a multimeter across its terminals
4
Check all wire connections at the heater terminals, thermostats, and thermal fuse for loose or burned connections
5
Replace the heating element and any fuses or thermostats that test open
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Electrolux dryer heating element (part #137234600)
Thermal fuse (part #137032800)
High-temperature wire connectors
Related Error Codes