e71
Easy Fix
Electrolux · Dryers
NTC Exhaust Thermistor Fault
Quick Answer
Error code E71 on your Electrolux Dryers means: NTC Exhaust Thermistor Fault. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Disconnect power and locate the exhaust thermistor, typically mounted in the exhaust duct near the blower housing
2
Clean any lint from around the thermistor sensor to ensure accurate readings
3
Disconnect the thermistor wires and test resistance with a multimeter (expect approximately 10k-50k ohms at room temperature depending on model)
4
Inspect the wiring and connector for heat damage or corrosion
5
Replace the NTC thermistor if the resistance reading is far outside the expected range or reads open
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Electrolux exhaust NTC thermistor (part #137047800)
Wire connector repair kit
Related Error Codes