ef1
Easy Fix
Electrolux · Dryers
Clogged Drain or Restricted Exhaust
Quick Answer
Error code EF1 on your Electrolux Dryers means: Clogged Drain or Restricted Exhaust. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Remove the lint screen and clean it thoroughly; inspect the screen for any tears or holes and replace if damaged
2
Disconnect the exhaust vent from the back of the dryer and clean the entire vent duct to the exterior termination using a dryer vent brush kit
3
Go outside and check the vent hood flap for free movement; remove any obstructions such as lint, bird nests, or ice
4
Ensure the vent ductwork uses rigid metal ducting (not vinyl or foil) and does not exceed the maximum length with bends counted
5
Reconnect the vent, run the dryer on air-only, and verify strong airflow at the exterior vent hood
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Dryer vent cleaning brush kit
Rigid metal vent ductwork (4-inch diameter)
Exterior vent hood (if damaged)
Replacement lint screen (if torn)
Related Error Codes