f2
Moderate
Fisher & Paykel · Dishwashers
Motor Fault - Wash Motor Not Running
Quick Answer
Error code F2 on your Fisher & Paykel Dishwashers means: Motor Fault - Wash Motor Not Running. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Listen for any sound from the motor when the cycle starts; a humming noise indicates a jammed motor, silence indicates an electrical failure
2
Remove the drawer filter assembly and check the wash pump intake for debris, glass fragments, or utensil pieces
3
Clear any obstructions and try to spin the motor impeller by hand to verify it rotates freely
4
If the motor is clear of debris, disconnect power and test the motor windings for continuity with a multimeter
5
Replace the wash motor if windings are open or if the motor is mechanically seized after clearing debris
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Fisher & Paykel wash motor assembly (model-specific)
Motor seal kit
Motor wiring connector
Related Error Codes