f4
Easy Fix
Fisher & Paykel · Dishwashers
Fill Timeout - Drawer Not Filling with Water
Quick Answer
Error code F4 on your Fisher & Paykel Dishwashers means: Fill Timeout - Drawer Not Filling with Water. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Verify the water supply shutoff valve under the sink is fully open
2
Disconnect the inlet hose from the water supply and clean the filter screen at the hose connection
3
Check household water pressure by running the kitchen faucet; weak flow indicates a supply issue
4
Test the water inlet valve solenoid with a multimeter for continuity (expected 500-1500 ohms)
5
Replace the water inlet valve if the solenoid is open or the valve does not open when the cycle starts
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Fisher & Paykel water inlet valve (model-specific)
Inlet hose screen filter
Water supply hose (if kinked or damaged)
Related Error Codes