001
Moderate
GE · Dryers
Inlet thermistor defective (open circuit)
Quick Answer
Error code 001 on your GE Dryers means: Inlet thermistor defective (open circuit). This is usually fixable — see the step-by-step guide below.
Affected Models
Specific models affected
Likely Causes
How to Fix It
1
Step 1: Unplug the dryer and locate the inlet thermistor on the side of the inlet air duct.
2
Step 2: Reconnect any loose wires on the inlet thermistor.
3
Step 3: Inspect the wire harness for damage.
4
Step 4: Measure thermistor resistance with a multimeter (47.6K-52.4K ohms at 77°F).
5
Step 5: Replace the inlet thermistor if resistance is out of range.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Inlet thermistor
Wire harness
Related Error Codes