003
Moderate
GE · Dryers
Inlet thermistor defective (short circuit)
Quick Answer
Error code 003 on your GE Dryers means: Inlet thermistor defective (short circuit). This is usually fixable — see the step-by-step guide below.
Affected Models
Specific models affected
Likely Causes
How to Fix It
1
Step 1: Unplug the dryer.
2
Step 2: Locate the inlet thermistor on the inlet air duct.
3
Step 3: Disconnect and measure resistance (should be 47.6K-52.4K ohms at 77°F).
4
Step 4: A near-zero reading indicates a short; replace the thermistor.
5
Step 5: Check wiring for damage that could cause a short.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Inlet thermistor
Related Error Codes