fe
Moderate
LG · Dishwashers
Fill error/overfill - the dishwasher has detected too much water in the tub and the drain pump has been automatically activated
Quick Answer
Error code FE on your LG Dishwashers means: Fill error/overfill - the dishwasher has detected too much water in the tub and the drain pump has been automatically activated. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Press the POWER button to turn off the dishwasher immediately
2
Check that you are using only dishwasher-specific detergent and not liquid dish soap
3
If there are excess suds, open the door carefully and remove excess foam
4
Verify the dishwasher is level using a spirit level; adjust leveling legs as needed
5
Inspect the water inlet valve for proper operation; if it does not shut off, replace it
6
Turn off the circuit breaker for 10 seconds, turn it back on, and start a new cycle
7
If the error persists, the water inlet valve or float switch may need replacement
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water inlet valve
Float switch
Related Error Codes