ie
Easy Fix
LG · Dishwashers
Water inlet error - the dishwasher did not fill with enough water within 10 minutes
Quick Answer
Error code IE on your LG Dishwashers means: Water inlet error - the dishwasher did not fill with enough water within 10 minutes. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Verify the water supply valve under the sink is fully open
2
Inspect the water supply line for kinks, bends, or damage and straighten or replace as needed
3
Check that water pressure is between 20-120 PSI; contact a plumber if pressure is too low
4
Remove any flood-safe hoses or check valves and replace with a standard inlet hose
5
Ensure the drain hose outlet is at least 10 inches above the base of the dishwasher to prevent siphoning
6
If the error persists, turn off the circuit breaker for 10 seconds, turn it back on, and start a new cycle
Pro Tip
This is a common issue that most users can resolve without specialized tools. Try the first step before moving on to more complex solutions.
Parts You May Need
Water inlet valve
Water supply hose
Related Error Codes