1e
Moderate
Samsung · Refrigerators
Freezer Sensor Error
Quick Answer
Error code 1E on your Samsung Refrigerators means: Freezer Sensor Error. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Unplug the refrigerator and locate the freezer thermistor (behind the freezer rear panel or evaporator cover)
2
Remove any ice or frost buildup around the sensor area
3
Disconnect the sensor and measure resistance (expected 5 kilo-ohms at 77°F/25°C; higher at freezer temps)
4
Check the wiring harness for damage, especially where it passes through the cabinet wall
5
Replace the sensor if resistance is out of specification per the temperature-resistance chart
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Freezer compartment thermistor (DA32-10104N)
Thermistor wire harness (DA96-00942A)
Related Error Codes