p0341
Moderate
Volkswagen · SUVs
Camshaft Position Sensor Circuit Range/Performance Bank 1
Quick Answer
Error code P0341 on your Volkswagen SUVs means: Camshaft Position Sensor Circuit Range/Performance Bank 1. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
CAID4ID6B25N5N-LWBCRAtlas Cross Sport SE 2024Atlas Cross Sport SEL 2024Atlas Cross Sport SEL R-Line 2024Atlas SE 2024Atlas SEL 2024Atlas SEL Premium R-Line 2024ID.4 Pro 2024ID.4 Pro S 2024ID.4 Pro S Plus 2024ID.4 Standard 2024Taos S 2024Taos SE 2024Taos SEL 2024Tiguan S 2024Tiguan SE 2024Tiguan SEL 2024Tiguan SEL R-Line 2024
Likely Causes
How to Fix It
1
Inspect the camshaft position sensor connector for corrosion, oil contamination, or bent pins
2
Test the camshaft position sensor signal with an oscilloscope to verify proper waveform
3
Check the wiring harness between the sensor and ECU for breaks, shorts, or chafing
4
Compare camshaft and crankshaft signals to verify proper correlation and timing
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Camshaft position sensor
Sensor connector or pigtail
Timing chain kit (if chain stretch is the root cause)
Related Error Codes