f6
Moderate
Whirlpool · Dishwashers
Water not filling at correct temperature or no water detected
Quick Answer
Error code F6 on your Whirlpool Dishwashers means: Water not filling at correct temperature or no water detected. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Check that the hot water supply is turned on.
2
Step 2: Verify that hot water runs from the kitchen faucet.
3
Step 3: Test the water inlet valve.
4
Step 4: Check the flowmeter for proper operation.
5
Step 5: Replace the water inlet valve if defective.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water inlet valve
Flowmeter
Related Error Codes