f6 e1
Moderate
Whirlpool · Dishwashers
No water entering dishwasher
Quick Answer
Error code F6 E1 on your Whirlpool Dishwashers means: No water entering dishwasher. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Check the overfill float in the lower right corner of the dishwasher floor.
2
Step 2: Remove any debris blocking the float disc.
3
Step 3: Gently lift and push the float - you should hear a click.
4
Step 4: Verify water supply is turned on.
5
Step 5: Check the water inlet valve on the inside left wall for flow.
6
Step 6: Replace the water inlet valve or float switch if defective.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water inlet valve
Float switch
Related Error Codes