f6 e2
Moderate
Whirlpool · Dishwashers
Water inlet valve windings open
Quick Answer
Error code F6 E2 on your Whirlpool Dishwashers means: Water inlet valve windings open. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Disconnect power and water supply.
2
Step 2: Check for obvious signs of damaged wiring harness.
3
Step 3: Test resistance at the valve terminals - should read approximately 1400 ohms.
4
Step 4: If infinite resistance is measured, replace the water inlet valve.
5
Step 5: If the error persists with a new valve, replace the main control board.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water inlet valve
Wiring harness
Main control board
Related Error Codes