f6 e7
Call a Pro
Whirlpool · Dishwashers
Flowmeter failure
Quick Answer
Error code F6 E7 on your Whirlpool Dishwashers means: Flowmeter failure. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Turn off power and water supply.
2
Step 2: Locate the flowmeter sensor.
3
Step 3: Check the wiring and connections to the flowmeter.
4
Step 4: Clean any blockages near the flowmeter.
5
Step 5: Replace the flowmeter if defective.
Pro Tip
This issue typically requires professional diagnosis. Attempting this fix without proper training could cause further problems.
Parts You May Need
Flowmeter sensor
Related Error Codes