f7
Moderate
Whirlpool · Dishwashers
Flowmeter issue - water flow not detected
Quick Answer
Error code F7 on your Whirlpool Dishwashers means: Flowmeter issue - water flow not detected. This is usually fixable — see the step-by-step guide below.
Affected Models
Applies to all models
Likely Causes
How to Fix It
1
Step 1: Check that the water supply tap is fully open.
2
Step 2: Inspect the water inlet hose for kinks or blockages.
3
Step 3: Clean the inlet hose screen filter.
4
Step 4: Test and replace the water inlet valve if needed.
Pro Tip
This fix requires some technical knowledge. If you're unsure about any step, consider contacting support or a qualified technician.
Parts You May Need
Water inlet valve
Inlet hose screen
Related Error Codes